It displays no images but the digitizer works, i thought that the pins i took pictures of were the Ones where you have to lift the Little plastic thing to inserto the flat cable. idk if thats the problem. i think i fixed the One from the 3rd photo with tape but idk
Posted by chevi_b
3 Comments
2nd picture is the NFC ribbon cable.
3rd picture is the backlight cable for the bottom display and this is probably the culprit, you can verfiy by putting a flashlight really close to the bottom screen when it’s on, you should be able to see a picture displayed on bottom just without backlight.
these connectors don’t work by lifting the tab, it’s just push and pull via the cable, lifting the tab can break the connector. (been there, done that)
If you lifted those up then you’ve destroyed them and the only real fix is to solder new connectors. This is the problem with Nintendo handheld repair. It’s important to remember for the future to always check Ifixit first to see whether the console you’re repairing has any of these connectors.
Yeah tape isn’t working.